🍓 Radioberry is a compact, open-source Software Defined Radio (SDR) add-on designed specifically for the Raspberry Pi. It combines the power of modern digital radio with the flexibility of the Pi, making it a favorite among amateur radio operators, makers, and RF enthusiasts.
🍓 Radioberry Kit on Amazon ⭐⭐⭐⭐⭐
Whether you’re experimenting with digital modes, learning about RF communication, or building your own low-cost transceiver, Radioberry provides an exciting entry point.
Table of Contents
📻 What Makes Radioberry Special?
Radioberry is based on the Hermes Lite 2 architecture — a powerful open-source SDR design — and integrates seamlessly with a Raspberry Pi using the GPIO interface.
It includes:
- 🛠️ A 12-bit ADC (Analog-to-Digital Converter)
- 🛰️ A wide receiver bandwidth (typically up to 5 MHz or more)
- 📡 Transmit capability — yes, it’s a transceiver!
- 🔌 Uses the Pi’s GPIO interface directly
- 🔁 OpenHPSDR-compatible (works with software like Thetis and Quisk)
This setup allows you to run a complete software-based HF (high frequency) transceiver — all on a Raspberry Pi!
Radioberry with Touch screen
Radioberry version2 features a HF SDR TRANSCEIVER integrated with Raspberry Pi 4B and a 7″ DSI Touch Screen
The product comes as an easy to assemble kit: Raspberry pi 4B 1G + radioberry + 7 inch capacitive touch screen + case + tf card with image flashed, you just need to assemble them together.
📦 Radioberry Features
| Feature | Details |
|---|---|
| 🧱 Form Factor | HAT (Hardware Attached on Top) for Raspberry Pi |
| 🧲 Frequency Range | Typically covers 0.1 to 30 MHz (HF) |
| 🔄 Modes | AM, SSB, CW, FM, Digital (FT8, PSK31, etc.) |
| 📡 Transceiver | Both transmit and receive |
| 🧑💻 Software | Compatible with Quisk, Thetis, OpenHPSDR |
| 🔧 DIY Friendly | Open-source hardware and firmware |
🔌 How to Use Radioberry with Raspberry Pi
- Install the board on top of a compatible Raspberry Pi (3B, 4, or newer).
- Flash the FPGA firmware onto the board (available on GitHub).
- Install OpenHPSDR-compatible software like Quisk on the Pi.
- Connect an HF antenna.
- Start exploring the airwaves!
🔁 Note: You may need basic Linux knowledge and familiarity with SDR software.
🎯 Who Is Radioberry For?
Radioberry is ideal for:
- Amateur radio operators interested in SDR
- Makers and RF tinkerers who love open hardware
- Educational use in DSP, FPGA, and RF learning
- Anyone wanting a compact low-power HF transceiver
🛍️ Where to Buy Radioberry
Radioberry is often sold in limited batches by hobbyist developers or small shops. Look for it on:
✨ Final Thoughts
Radioberry combines the open-source flexibility of Hermes Lite with the versatility of the Raspberry Pi, giving RF experimenters a compact, affordable, and powerful SDR transceiver. If you’re looking for a way to take your ham radio or SDR experiments to the next level, Radioberry is a fantastic platform to explore.